Ford Galaxy Key Fob How to Change a Battery in a Ford Galaxy Key Fob – Step-by-Step Guide

Car DIY
DIYWorkshop

Step-by-Step Guid

How to Change a Battery in a Ford Galaxy Key Fob – Step-by-Step Guide

Your Ford Galaxy key fob is an essential part of your vehicle, allowing you to lock and unlock your car remotely. Over time, the battery inside the key fob will lose power, making it difficult or impossible to use the remote features. Luckily, changing the battery is a simple DIY task that requires minimal tools and effort. This guide will take you through the entire process, step by step.

Why Replace Your Ford Galaxy Key Fob Battery?

A weak or dead battery in your key fob can cause various issues, including:

  • Reduced range or failure to unlock the vehicle remotely
  • The key fob not responding at all
  • Difficulty in starting the car (if your key fob has a proximity function)

Replacing the battery promptly ensures you don’t get locked out of your vehicle or experience unnecessary inconvenience.

What You’ll Need

Before you start, gather the following tools:

  • A small flat-head screwdriver or a plastic pry tool
  • A replacement battery (commonly CR2032, but check your owner’s manual)
  • A clean cloth to prevent scratches

Step 1: Identifying Your Ford Galaxy Key Fob Type

Ford Galaxy models use different types of key fobs depending on the year of manufacture. The most common types include:

  1. Flip Key Fob – A traditional key fob with a flip-out metal key blade.
  2. Smart Key Fob – A proximity-based key fob that allows keyless entry and push-button start.

While both types use coin cell batteries, the opening mechanism may vary slightly.

Step 2: Locating the Key Fob Battery Compartment

For most Ford Galaxy key fobs, the battery compartment is found at the back of the fob.

  1. Look for a small groove or indentation along the seam of the key fob.
  2. If you have a flip key, the battery compartment is usually under the rear cover.
  3. If you have a smart key, the compartment may be accessible after removing the emergency key blade.

Step 3: Opening the Key Fob

  1. Use a small flat-head screwdriver or plastic pry tool to gently separate the key fob halves.
  2. Insert the screwdriver into the groove and twist slightly to pop the casing open.
  3. Be careful not to apply too much force to avoid damaging the plastic casing.
  4. If your key fob has an emergency key, remove it first before opening the case.

Step 4: Removing the Old Battery

  1. Once the key fob is open, locate the battery.
  2. Note the orientation of the battery (which side is facing up) before removing it.
  3. Use the flat-head screwdriver or a fingernail to carefully lift the battery out.
  4. Dispose of the old battery properly, as lithium coin cells should not be thrown in the regular trash.

Step 5: Installing the New Battery

  1. Take the new CR2032 battery and place it in the same orientation as the old one.
  2. Ensure the positive (+) side is facing the correct way, typically upwards.
  3. Gently press the battery into place until it sits securely in the compartment.

Step 6: Reassembling the Key Fob

  1. Align both halves of the key fob carefully.
  2. Press them together firmly until you hear a snapping sound.
  3. If your key fob has an emergency key blade, slide it back into place.

Step 7: Testing the Key Fob

  1. Stand near your vehicle and press the lock/unlock button to check if the key fob is working properly.
  2. If your Ford Galaxy has a push-button start, try starting the engine with the key fob inside the car.
  3. If the key fob still doesn’t work, double-check the battery placement and try again.

Troubleshooting Common Issues

If your key fob does not work after battery replacement, consider the following:

  • Incorrect Battery Orientation: Ensure the battery is installed with the correct polarity.
  • Dirty Contacts: Clean the battery compartment with a dry cloth before inserting the new battery.
  • Damaged Key Fob: If your key fob was dropped or exposed to moisture, internal components may be faulty.
  • Key Fob Needs Reprogramming: Some newer Ford models require the key fob to be synced with the car again.

How Long Does a Ford Galaxy Key Fob Battery Last?

On average, a Ford Galaxy key fob battery lasts between 2 to 4 years, depending on usage. Frequent use of remote features like locking/unlocking and keyless start will drain the battery faster.

Where to Buy a Replacement Battery

CR2032 coin cell batteries are widely available and can be purchased from:

  • Automotive stores
  • Online marketplaces ( Amazon , eBay , etc.)
  • Electronics retailers
  • Supermarkets with battery sections

Make sure to buy a high-quality battery from a reputable brand to ensure longevity.

Final Thoughts

Changing the battery in your Ford Galaxy key fob is a quick and easy process that can save you time and money. By following this step-by-step guide, you can ensure your key fob remains functional and reliable for years to come.

  • Ford Galaxy key fob battery replacement
  • How to change Ford key fob battery
  • Ford Galaxy remote key battery DIY
  • Ford key fob battery type CR2032
  • Ford Galaxy key fob not working
  • Ford keyless entry battery replacement
  • Ford smart key fob battery change

AI-Generated Thumbnail

Please follow and like us:
error75
fb-share-icon
Tweet 20
fb-share-icon
Car DIY
In, , , , ,

Leave a Reply